Aircraft Hangars

We offer an inflatable structure for aircraft and helicopters storage and maintenance. Our aircraft hangars are of wide span design, do not require a foundation, and have been tested under the harshest conditions.

Completed Projects
Years of Experience
> 100
Patented Developments

Easy Solutions up to Your Tasks!

Aircraft hangar is an inflatable structure made of reinforced PVC materials, consisting of forming pneumatic cylinders, end walls equipped with doorways for pneumatic gates, connected into a single structure and covered with a prefabricated shell.
Each pneumatic cylinder is of half-torus design, automatically filled with air using an intelligent booster system. The end walls are equipped with door assembly, pneumatic gates, openings for supply and exhaust ventilation and heat-insulated channels for chimney.
For staff and visitors are provided aluminum doors with closers on a metal frame. Cargo gates open/close using an electric hoist, thus providing pass-through for machinery and equipment.
The pre-fabricated protective shell covers the pneumatic cylinders, providing increased wind and snow resistance, and also improves heat-saving specifications of the structure.

Saving Energy and Maintenance Costs

Translucent reinforced PVC materials ensure high light transmission into the structure and make it possible to do without artificial lighting in the daytime. Thermal insulation properties of the multi-layer enclosure structure in combination with heating, ventilation and air conditioning systems provide comfortable working conditions.

Extending Aircraft Life

There are always problems in the aviation industry with corrosion damage occurring on the casing of machines based on airfields located near industrial or coastal areas. For irregularly used aircraft stored in the open air, the cost of maintenance and the rate of depreciation increases, subsequently leading to a decrease in the aircraft market value in case of its resale.

We offer aircraft hangars in several standard sizes with heating ventilation and air conditioning systems, which will allow keeping the aircraft in excellent condition for a long time and carry out high-quality maintenance.

Our hangars provide almost airtight storage of aircraft. The use of an additional dehumidifier and ventilation system ensures clean storage at low humidity in any climate zone.

Hangar Specifications

Effective area
100 to 10000 m² / 538 to 107639 ft²
Inner width
10 to 60 m / 32 to 197 ft
Inside height
7 to 30 m / 23 to 98.5 ft
Installation time
1 to 7 days
Operating temperature
-60 to +70 °C / -76 to 158 °F
Air spring diameter of
1.5 to 4 m² / 16 to 43 ft²
One air spring weight
70 to 1,550 kg / 154 to 3417 lbs
Pumping system power
1 to 20 kW
Total weight of the construction
1.8 to 100 t / 1.98 to 110 ton
Wind resistance
up to 45 m/s / 100 mph
Life of hangars
at least 15 years
Material used
reinforced PVC

Contact us, we will consult
and calculate the cost of your hangar


Hangars in Stock

Aircraft Hangar MPA 20-11-600

Reliable hangar for hosting aircraft of any size, both civilian and military.

Useful area
600 m² / 717 yd²
Internal width
20 m / 65 ft
Internal length
30 m / 98 ft
Inner height
11.5 m / 36 ft
Freight gate size
17х7 m (55х23 ft) or 19х7 m (62х23 ft)
Total weight of the hangar
8,5 T
Size in packed form
2 х 6 х 1,4 m / 6.5 x 19 x 5 ft
Power consumption
4 to 5 kW

Installation takes 2-3 days depending on the area. Durable, lightweight, fireproof materials. Walls retain heat similar to 640 mm (2 ft) brickwork. 5 years warranty, 20 years of service life, hangars do not require major repairs.

Looking for a building suitable for ?

Feedback from our Clients

Client Logo
Client Logo
Client Logo
Client Logo
Client Logo
Client Logo

We’ve Been Creating Inflatable Structures Since 1999

Our company has its own production facilities with a total area of over 5,000 m² and has the state-of-the-art equipment capable to produce more than 20,000 m² of finished products every year.


Our experts have developed more than a hundred new designs protected by copyright certificates for inventions and patents.
Automated design system and engineering analytics makes it possible to quickly fulfill orders of any complexity level.


We provide training of the Customer’s staff in a volume sufficient for installation, operation and maintenance of pneumatic hangars, including theoretical and practical training on repair methods in case of blow-by or for restoration of tissue cover.


All our products are covered by a five-year warranty, during which we carry out repair, supply of original spare parts and repair kits free of charge.


Our service centers provide installation, training and general management services for the installation and further operation of pneumo-framed structures and pneumatic hangars

How We Work

We will answer any questions
and make you a commercial offer